Using Eco-Friendly cleaners and filtered water, wash and clean panels providing pre and post pictures and power output readying.

Inspect the inverter/electrical pad and or walls to make sure it does not show excessive cracking or signs of wear. The inverter should be bolted to the pad at all mounting points per the manufacturer installation requirements.

Confirm Inverters have all green lights.

Inspect PV modules for defects that can appear in the form of burn marks, discoloration, delamination, or broken glass.

Check modules for excessive soiling from dirt buildup or animal droppings.

Inspect racking system for defects including rust, corrosion, sagging, and missing or broken clips or bolts.

Inspect conduits for proper support, bushings, and expansion joints, where needed.

On roof-mounted systems, check the integrity of the penetrations.

On ground-mounted systems, look for signs of corrosion near the supports.

Open combiner boxes and check for torque marks on the connections.

Inspect wire nuts and irreversible crimps in combiner boxes if applicable.

Using Eco-Friendly cleaners and filtered water, wash and clean panels providing pre and post pictures and power output readying.

Inspect the inverter/electrical pad and or walls to make sure it does not show excessive cracking or signs of wear. The inverter should be bolted to the pad at all mounting points per the manufacturer installation requirements.

Confirm Inverters have all green lights.

Inspect PV modules for defects that can appear in the form of burn marks, discoloration, delamination, or broken glass.

Check modules for excessive soiling from dirt buildup or animal droppings.

Inspect racking system for defects including rust, corrosion, sagging, and missing or broken clips or bolts.

Inspect conduits for proper support, bushings, and expansion joints, where needed.

On roof-mounted systems, check the integrity of the penetrations.

On ground-mounted systems, look for signs of corrosion near the supports.

Open combiner boxes and check for torque marks on the connections.

Inspect wire nuts and irreversible crimps in combiner boxes if applicable.

Using Eco-Friendly cleaners and filtered water, wash and clean panels providing pre and post pictures and power output readying.

Inspect the inverter/electrical pad and or walls to make sure it does not show excessive cracking or signs of wear. The inverter should be bolted to the pad at all mounting points per the manufacturer installation requirements.

Confirm Inverters have all green lights.

Inspect PV modules for defects that can appear in the form of burn marks, discoloration, delamination, or broken glass.

Check modules for excessive soiling from dirt buildup or animal droppings.

Inspect racking system for defects including rust, corrosion, sagging, and missing or broken clips or bolts.

Inspect conduits for proper support, bushings, and expansion joints, where needed.

On roof-mounted systems, check the integrity of the penetrations.

On ground-mounted systems, look for signs of corrosion near the supports.

Open combiner boxes and check for torque marks on the connections.

Inspect wire nuts and irreversible crimps in combiner boxes if applicable.